Precision Thermometer 2
Model #THS-222-501/222-001
Interchangeable RTD probes
Very repeatable 0.1° resolution
Great choice for high accuracy with many probe types available
Accepts 3-wire RTDs
 Click and hover to zoom. Click again to view larger image.
The platinum RTD is the sensor of choice when a wide range is required with better accuracy than a thermocouple can offer. This meter can be used interchangeably with any of our growing selection of RTD probes. You can also use this meter with sensors of the same type from other manufacturers (order the optional spare connector). Each meter is calibrated against resistance standards simulating temperature. A factory calibration certificate is included with data at two temperatures. We offer other calibration options including additional temperature points or a calibration of the meter with a probe of your choice tested as a "system".
Designed for hard daily use with a big, easy-to-read display. A single switch turns the meter on and off. No extra buttons, no set-up, and no programming eliminates operator errors. The optional attaché cases give you a safe place to store or carry the thermometer and probes. The rubber boot protects the meter from hard knocks.
| Range |
-99.9 to 199.9°F (-99.9 to 199.9°C) |
| Accuracy |
±0.4°F (±0.2°C) |
| Resolution |
0.1°F or °C |
| Probe |
Not included, 3-wire, 100 ohm platinum RTD, IEC 751 (DIN 43760) |
| Battery |
9V, 200 hours |
| Dimensions |
5.8" x 3.15" x 1.42"
(147mm x 80mm x 36mm) |
| Certificate |
NIST-Traceable Certificate included |
Optional Hard Case
Fits meter, wipes and
one to two probes (834-100)
 Optional Rubber Boot
Superior grip, helps protect your meter from vibration and impact.
Built-in stand.
(830-200)
Wall Bracket
For Precision 2.
(832-110)
 |
Small Carrying Case
Model: THS-834-100
- Custom foam fits meter
- Built-in probe slot
- Hard plastic protective case
|
Made for Therma and MicroTherma series meters. Instrument fits perfectly into custom foam cutout along with room to fit a spare 9V battery, mini-tub of probe wipes, and thermocouple probe.
|
|
|
 |
Protective Boot
Model: THS-830-200
- Fits Therma 3, Reference, etc (see image)
- Silicone Rubber
- Protects from drops
- Built-in stand
|
Protective silicone rubber boot. Protects meter from drops & bumps. Fits snugly around meter. Includes built-in stand for convenience.
|
|
|
 |
Wall Bracket
Model: THS-832-110
- Fits Therma Series Meters
- Prevents drops & bumps
- Keeps unit close to work area
|
Keeps meter and probe close to work area with handy wall mount hole.
|
|
|
Optional RTD Probes
- Penetration, surface, high temp, wire, and more
- Select coiled or flat cables with optional extended cable lengths
 |
Select Category to View Probes |
|
Click and hover to zoom. Click again to view larger image.
