Reference Thermometer, ±0.05°C System Accuracy
Model #222-555
Includes UKAS certificate with data at 5 points.
Meets high accuracy requirements in dairy, pharmaceutical and other critical industries.
Great choice for health inspectors and quality auditors
Certified accuracy to ±0.05°C (±0.1°F) including probe
 Click and hover to zoom. Click again to view larger image.
This thermometer is an affordable end to arguments over temperature accuracy. We start with a high stability platinum RTD sensor rated at 1/10th the conformance limits of the DIN specification. The general purpose probe is attached to a high precision resistance thermometer that provides 0.01° resolution. The combination is calibrated as a system to minimize all errors and the final deviations are given for five temperatures on the included calibration certificate. Other companies charge this much for just the calibration certificate! In this accuracy and temperature range you can't beat this value.
| Range |
-328 to 400°F (-200 to 200°C) |
| Accuracy |
±0.1°F (±0.05°C), meter and probe combined |
| Resolution |
0.01°F/°C |
| Probe |
4W RTD 1/10 DIN, fixed |
| Cal Points |
0, 32, 104, 158, and 212°F
(-18, 0, 40, 70 and 100°C) |
| Battery |
3 x AAA, 2000 hours |
| Dimensions |
1" x 2.2" x 5" (25mm x 56mm x 128mm) |
| Weight |
4.6 oz. (130 g) |
| Certificate |
Fully accredited UKAS lab, traceable to national standards, 5 points calibration certificate |
 |
Rubber Boot
Model: THS-830-253
- Provides added protection
- Water resistant to IP63 when installed
- Easily removed for cleaning
|
Protects the Reference Thermometer from drops, bumps and kitchen splashes. Is easily removed for cleaning. Can be used in conjuction with wall bracket (832-050).
|
|
|
 |
Rubber Boot with Probe Holder
Model: THS-830-255
- Provides added protection
- Water resistant to IP63 when installed
- Easily removed for cleaning
- Retains standard probe when not in use
|
Same as 830-253 boot but includes rear exterior grooves for retaining standard probes when not in use.
|
|
|
 |
Wall Bracket
Model: THS-832-050
- Stores meter and probe
- Prevents drops & bumps
- Keeps unit close to work area
|
Keeps meter and probe close to work area with handy wall mount hole.
|
|
|
 |
Light Duty Storage Case
Model: 10210
- Customized soft foam
- Dual Latches
- Fits meter & probes
- Light-duty
|
Stores meter and probes. Custom soft foam protects from drops & bumps. Lots of room for probes and spare batteries. Two latches keep lid closed in transit.
|
|
|
Click and hover to zoom. Click again to view larger image.
