|
|
 |
 |
|
Sato Temperature/Humidity Logger
- Store 8,100 readings.
- Easy-to-use Windows software included.
- Set log interval from 1 sec. to 90 min.
- LCD bar graph shows memory usage.
- Download data to PC via included USB Cable.
|
 If you have to record temperature and humidity, you won't find a better value than this. The large LCD display makes this compact logger easier to set-up and more convenient to use than "blind" loggers that require a PC to read values or set-up a log session. Other full-feature loggers are much bigger, more expensive and more complicated to use. You can learn to use our SK series in about five minutes.
 Each logger includes a socket to interface with several available sensors, ready-to-run Windows based software for down-loading and charting data, USB cable, USB port cap, hand strap, and batteries. You also get a factory calibration certificate with actual test data from your logger. When the power is turned off, data in the internal memory is retained. The logger runs up to 4 months on 2 AAA cells. When the battery is low an indicator comes on and the unit will shut down and save your data.
The Real Time Software package is included with every logger. It is a complete Windows solution for continuous data acquisition.
| Specifications |
|
| Measurement Range: |
–15°C to 65°C (3.2°F to 149°F)
10 to 99.9%rh
(depends on probe that is connected) |
| Measurement Accuracy: |
±0.1°C + 1 digit
±0.1%rh + 1 digit
|
| Measurement Conditions: |
Ambient temp. for unit: -10 to 60°C (14 to 140°F), no condensing
|
| Resolution: |
Temp: 0.1°C at -9.9 to 205°C, 1°C at -10°C or less
Humidity: 1%rh at less than 15.0% |
| Sensors: |
Thermistor, High Plymeric Resistance change type |
| Sampling (Display): |
Approximately 1 second |
| Log Intervals: |
14 options from 1 second to 90 minutes |
| Memory Capacity: |
8,100 lines of data |
| Communication: |
USB (cable included) |
| Software: |
Windows 2000 / XP download and analyze software included;
real-time data acquisition software included |
| Calibration: |
Factory certificate included with data (Sato, Japan) |
| Power Supply: |
Two AAA alkaline batteries included |
| Battery Lifetime: |
Continuous measurement mode: 500+ hours
Logging mode: possible to 8100 data pts. with every log interval
(ex: about 506 days with log interval of 90 minutes) |
| Size: |
100 x 73 x 22 mm |
| Weight: |
123g, without batteries |
To Order:
| SK-L200TH II |
Sato Temperature/Humidity Logger Version II
Does not include probe. Choose any of the following probes. |
|
|
| P1200 |
Heavy Duty Carry Case, Foam Lined, Waterproof |
|
|
SATO SK-L200TH II Temperature Probes
| Measuring range: |
-10 to 60°C (14°F to 140°F) |
| Temperature Accuracy: |
<-15.0°C |
±1.0°C |
| 15.0 to 35.0°C |
±0.5°C |
| >35.0°C |
±1.0°C |
| Humidity Accuracy: |
<-10.0°C |
±7%rh |
| 10.0 to 14.9°C |
±5%rh |
| 15.0 to 35.0°C |
±3%rh |
| 35.1 to 50.0°C |
±5%rh |
| >50.0°C |
±7%rh |
| SK-LTH II-1 |
SK-LTH II Standard Plug-in Probe, -10 to 60°C |
|
|
| Measuring range: |
-10 to 60°C (14°F to 140°F) |
| Temperature Accuracy: |
<-15.0°C |
±1.0°C |
| 15.0 to 35.0°C |
±0.5°C |
| >35.0°C |
±1.0°C |
| Humidity Accuracy: |
<-10.0°C |
±7%rh |
| 10.0 to 14.9°C |
±5%rh |
| 15.0 to 35.0°C |
±3%rh |
| 35.1 to 50.0°C |
±5%rh |
| >50.0°C |
±7%rh |
| Cord Length: |
1.5 meters |
| SK-LTH II-2 |
SK-LTH II Standard Plug-in Probe w/ 1.5m cord, -10 to 60°C |
|
|
|
|
