Start with the quality and features of the I.R.F.S. but add better accuracy, Type T thermocouples and adjustable emissivity and you’ll get the I.R.T. Combo Meter. You won’t find better accuracy in a handheld infrared meter. You also won’t find one that reads Type T thermocouples.

The simple mode button steps through each of the useful features found on the I.R.T. You get max, min, diff, and avg readings. You can also set High Low Alarms to give a gentle beep if your reading does not meet the thresholds you set. In the emissivity mode, you can set the meter to read the temperature of almost any material.

When in the Probe mode, you get two easy-to-read displays. One for the reading and one for the thermocouple probe. You’d be surprised how complicated other combined units can be. Not here. The bright laser and the display backlight can both be turned off if you wish or left to come on during each use.

If you’re a health inspector, food QA professional or a researcher, this is the best choice.

Specifications
Range	IR:-67°F to 536°F, -55°C to 280°C TC:-76°F to 662°F, -60°C to 350°C
IR Accuracy	Tobj=15-35°C: ±0.6°C, Full Range: -33° to 0°:±(1°C + 0.1/degree) 0° to 65°:±1°C above 65°:±1.5%
Thermocouple Accuracy	below -5°:±1°C -5° to 65°:±0.5°C above 65°:±1%
IR Repeatability	0.1°C at 25°C, 0.5°C at 80°C
Resolution	0.1° from -9.9 to 199.9, 1° beyond
Units	Switchable °C or °F
Emissivity	0.1 to 1, adjust in 0.01 increments
Response Time	1 second
Dist:Target Ratio	11:1 (1" target diameter at 11" distance)
Operating Range	32°F to 122°F, 0°C to 50°C
Battery	2x AAA, included
Battery Life	180 hours typical; 140 hours continuous use (alkaline, without laser and back light)
Certificate	Each unit is calibrated at the factory using NIST-Traceable standards and a Certificate of Conformance is included.
User Manual	Click to download PDF

Click here to order 0.1°C PROBES (with speeds up to 0.08 sec.)

Click here to order 0.2°C PROBES