|
|||||||||||||||
 |
Limited Time:
|
|
Select a ThermaData Series I temperature logger for a low-cost simple-to-use logging solution. The software is easy to install and setup for quick logging of temperature data. If you have a spare USB port on your PC you’ll be recording and downloading data in just a few minutes. Check the logger at any time with a simple push button indicator to see if the alarm parameters have been breached. This makes a perfect transportation logger. Check the alarm condition at the remote site without needing to download data. With a temperature range from -40 to 183°F, you can record temperature data in the walk-in, in transit, in cold storage, and on the factory floor. Convenient setup screens in the software allow you to configure the recording interval from 1 to 255 minutes per reading and start on a delay. Data can be emailed, exported, and reviewed with our software or even EXCEL. The Series I loggers are available in white or black. An eyelet tab makes it convenient to hang securely. Select an optional waterproof pouch for rugged data logging environments. Download data directly from our Series I logger to a legacy PDA for convenience. Call for PDA compatibility. (requires PDA software and PDA cable). The same easy-to-use ThermaData software runs our new Series II loggers so you’ll only need to learn one software package to run all of your temperature and humidity recorder.
|
Alarm Indication
ThermaData Software Suite
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
