|
|
 |
Platinum RTD Probes
The platinum RTD sensor generally provides better accuracy and long term stability than thermocouple sensors. Calibration labs and standards bodies use platinum RTD sensors as reference instruments when calibrating other thermometers.
The following probes are interchangeable and conform to the IEC 751 (DIN 43760) standard. All probes use a Class A 100 ohm sensor unless otherwise specified. 3-wire construction is standard. Provided with a 39” cable and a connector that fits our standard RTD Precision Thermometer, unless otherwise indicated (go here to order probes for the Digi-Sense ThermoLogR). Longer cables and custom length probe shafts are available on request. Other connectors, lead terminations, and 1000 ohm sensors are available on request.
|
|
Handheld Immersion Probe
Features a rigid stainless steel sheath with 1/8” diameter. Used in liquids or gases. Our most popular probe for general useage. Max. temp. 392°F |
| 160-220 |
Handheld Immersion Probe |
|
|
|
Handheld Penetration Probe
Use for liquids, semi-solids and core temperatures in a variety of materials.1/8” diameter stainless steel shaft is drawn to a point for easy insertion. Popular in foods, rubber and plastic. Max. temp. 392°F. |
| 160-160 |
Handheld Penetration Probe |
|
|
|
Handheld Air or Gas Probe
The stainless steel shaft is open ended with a ventilation hole provided in the sides to expose the bare RTD sensor to the outside for faster measurements of air or gases. Ideal for environmental readings, cold storage or HVAC work. Max. temp. 392°F. |
| 160-300 |
Handheld Air or Gas Probe |
|
|
|
Handheld Surface Probe
Stainless steel stem with a spring loaded sensing tip. Tripod supports help to position the sensor flat against the surface being measured. Class B sensor. Max. temp. 392°F. |
| 160-000 |
Handheld Surface Probe |
|
|
|
Between Pack Probe
Rigid stainless steel sheath is flattened for insertion between packages of produce, frozen foods or other products. Slips easily between cartons or plastic bagged products. The tip is rounded to minimize accidental penetration of packaging materials. Max. temp. 392°F. |
| 160-060 |
Between Pack Probe |
|
|
|
Air/Gas Wire Probe
Designed for HVAC work, cabinets, temperature chambers and environmental measurements. Small stainless steel shaft is ventilated for fast response. The 39” cable is PTFE/FEP insulated. Max. temp. 392°F. |
| 160-372 |
Air/Gas Wire Probe |
|
|
|
 |
|
Probe Wipes
Each wipe is pre-saturated with a broad spectrum anti-bacterial solution that is odorless and does not taint food. An Ideal way to sanitize and cleanse probes |
|
|
