Thermocouple Probes

Type K Wire Probes

connectorPlastic handles and thermocouple plugs are rated for short term exposure of 250°F (121°C) and extended exposure of 212°F (100°C). Sensor and cable ranges are listed for each probe.
Thermocouple Probe Quick Selection
Immersion/General Purpose

Fine Gauge Wire Probe

Model: 113-362/363/365

ThermoWorks Image
PTFE insulated with exposed junction. Easily taped, clamped or glued to surfaces, in holes. Wire dia: 0.01", 0.024" with insulation. Very fast air, gas or general purpose.
Sensor Range: -58 to 482°F (-50 to 250°C)
Cable: -58 to 482°F (-50 to 250°C)
Time Constant: Less than 0.5 seconds typical in liquid. Less than 2.5 seconds full reading.
Accuracy: ±0.9°F (±0.5°C) from 32 to 212°F (0 to 100°C)
Select probe and add to cart

From:


High Temp Wire Probe

Model: 113-382/383/385

ThermoWorks Image
The High Temp Wire Probe is a good low-cost high temp probe for ovens and backyard grills. It's protected with a fiberglass insulation, however, you should avoid using it over 660°F. Avoid direct immersion in liquids or direct contact with food. Available in multiple lengths.
Sensor Range: -77 to 660°F (-75 to 350°C)
Cable: -77 to 660°F (-75 to 350°C)
Time Constant: Less than 0.5 seconds typical in liquid. Less than 2.5 seconds full reading.
Accuracy: ±0.9°F (±0.5°C) from 32 to 212°F (0 to 100°C)
Select probe and add to cart

From:


Heavy Duty Wire Probes

Model: 113-372/373/375

ThermoWorks Image
PTFE insulated with exposed junction. Stranded wire with less than 0.1" overall diameter. General purpose.
Sensor Range: -58 to 482°F (-50 to 250°C)
Cable: -58 to 482°F (-50 to 250°C)
Time Constant: Less than 0.5 seconds typical in liquid. Less than 2.5 seconds full reading.
Accuracy: ±0.9°F (±0.5°C) from 32 to 212°F (0 to 100°C)
Select probe and add to cart

From:


High Temp Flexible Ceramic Fiber-Insulated Probe

Model: WD-08467-64/WD-08467-64-10

ThermoWorks Image
The High Temp Flexible Ceramic Fiber Insulated Probe is used in commercial ovens and furnaces. Good choice to monitor fireboxes, kilns, grills, etc. However, it's not designed for direct food measurements.
Sensor Range: -58 to 2200°F (-50 to 1204°C)
Cable: -58 to 2200°F (-50 to 1204°C)
Time Constant: Less than 1 seconds typical in liquid. Less than 5 seconds full reading.
Accuracy: ±0.9°F (±0.5°C) from 32 to 212°F (0 to 100°C)
Select probe and add to cart


High Temp Alligator Clip Oven Probe

Model: 8468-22

ThermoWorks Image
The High Temp Alligator Clip Oven Probe is used by commercial kitchens to calibrate and profile ovens. A stainless steel overbraid protects the probe and a fiberglass inner sheath protects the 120" lead. The clip can be easily attached to an oven rack and allows you to place it right where you need it. Great for temporary monitoring of oven temps during roasting or baking.
Sensor Range: -58 to 900°F (-50 to 482°C)
Cable: -103 to 900°F (-75 to 482°C)
Time Constant: Less than 1 seconds typical in liquid. Less than 5 seconds full reading.
Accuracy: ±0.9°F (±0.5°C) from 32 to 212°F (0 to 100°C)


Crocodile Clip Oven Probe

Model: 113-041

ThermoWorks Image
The Crocodile Clip Oven Probe is used by commercial kitchens to calibrate and profile ovens and grills. A stainless steel overbraid protects the probe and a fiberglass inner sheath protects the 78" lead. The clip can be easily attached to an oven rack and allows you to place it right where you need it. Great for monitoring grill temps during roasting, searing or smoking.
Sensor Range: -58 to 660°F (-50 to 350°C)
Cable: -77 to 660°F (-75 to 350°C)
Time Constant: Less than 2 seconds typical in liquid. Less than 10 seconds full reading.
Accuracy: ±0.9°F (±0.5°C) from 32 to 212°F (0 to 100°C)


PTFE/FEP Tip Probes

Model: 113-372/373/375-T

ThermoWorks Image
Use in dishwashers, freezers or anywhere a waterproof thermocouple is useful. Stranded wire cable with PTFE insulation and a cylindrical cap sealed over the junction.
Sensor Range: -58 to 482°F (-50 to 250°C)
Cable: -58 to 482°F (-50 to 250°C)
Time Constant: 15 seconds for full reading.
Accuracy: ±0.9°F (±0.5°C) from 32 to 212°F (0 to 100°C)
Select probe and add to cart

From:


Wire Probe Attachment Pads (Pack of 25)

Model: 600-485

Wire Probe Attachment Pads
Adhesive-backed attachment pads for securing wire probes to surfaces. Made of high temp PTFE to cover range from -58 to 392°F (-50 to 200°C). Supplied in pack of 25.
Range: -58 to 392°F (-50 to 200°C)
Dimensions: 0.5 x 0.7 inches (12 x 18 mm)


Coiled Type K Extension Lead

Model: XCK-2M-MF

ThermoWorks Image
Extend the reach of your probe with this probe extension lead. Cable is coiled and works with type K probes and meters. Features a plug on one end and socket on the other. Length is 79" (2 meters) from plug to socket.
Cable: 14 to 221°F (-10 to 105°C)


Straight Type K Extension Lead

Model: XSK-3M-MF

ThermoWorks Image
Extend the reach of your probe with this probe extension lead. Cable is straight and works with type K probes and meters. Features a plug on one end and socket on the other. Length is 118" (3 meters) from plug to socket.
Cable: 14 to 221°F (-10 to 105°C)

Icon Legend
Icon Category Icon 1
Icon Category Icon 2
Icon Category Icon 3
Icon Category Icon 4
Icon Category Icon 5
Icon Category Icon 6

Our Company


 

Gift Wrap

Gift Wrapping

We'll wrap your gift in our custom gift paper, trimmed with a bow and gift tag. The rich, graphite and silver combination is suitable for any occasion or anybody.

Enter a custom message for the handwritten tag (Up to 50 characters). Cost for wrapping is $4.99 per item. Each item wrapped separately. Selectable in the order info where available. Some items can not be wrapped.

Ordering more than one of the same item but don't want them all wrapped? Just add each item you want wrapped to your shopping cart individually and select the wrapping option. Add your custom greeting for each wrapped item separately as you add the item to your cart.