In StockReady to ship
In StockReady to ship
Take your fridge and freezer monitoring to the next level with this two-channel alarm thermometer. Set your probes and your target temperature ranges and be alerted if anything goes out of compliance. An alarm-state timer lets you know when you had a problem.
- Dual display for fridge and freezer
- Programmable alarm temperatures
- Alarm duration counter
- LED and audible alarms
- Magnetic attachment
- Max and Min function
Our RT8100 is a fully programmable two channel fridge/freezer alarm thermometer. Insert one probe in the freezer and one in the fridge, set the high and low temperature limits, and the RT8100 alarms when your product is outside your limits so you can quickly remedy the problem. Each channel can be set to alarm at any temperature from -40°F to 158°F. Preset limits are included, but are user programmable.
Choose an audible or LED alarm for notification. After 30 minutes in alarm, a duration counter will tell you the elapsed time since the alarm condition began. If the temperature returns to normal while you are away, a caution symbol will remain on the display to prompt you. The counter continues to show elapsed time since the alarm began so you can calculate the time. Min/Max will also indicate the highest and lowest temperatures reached during your monitoring cycle.
Each probe includes a suction cup holder with three feet of small gauge cable to attach into place and secure in the closed door. The RT8100 takes two standard AAA batteries and includes a convenient fold out stand and magnetic rear panel clips.
Our RT8100 is ideal for foods, pharmaceutical, medical, and chemical storage. Set yours to monitor overnight and when you check in the morning you'll confirm the temperatures. Try one today and eliminate worry.
|Range||-40 to 158°F (-40 to 70°C)|
|Default Alarm Limits|
|Fridge alarm on if reading is outside the range of 32 to 46.4°F (0 to 8°C)|
Freezer alarm on if reading is higher than 0.4°F (-18°C)
|Alarm Sound Level||70 dB|
|Reading Update||10 seconds|
|Program Alarm Resolution||1.0° F or C|
|Alarm Duration Counter||99 hours and 59 minutes (starts after 30 minutes)|
|Battery||1.5 volt, type AAA or equivalent x 2 pieces (included)|
|Probe Cord Length||39.4 inches (1,000 mm)|
|Display||3.5 (W) x 0.63 (H) inches|
90 (W) x 16 (H) mm
|Dimensions||5.3 (W) x 1.77 (H) x 0.9 (D) inches |
135 (W) x 45 (H) x 23 (D) mms
|Included Accessories||1) 1.5 volt, type AAA battery x 2 pieces|
2) Suction cups x 2 pieces