Pro-Surface Thermapen®
5-up: $114.00 ea.
- Measures surface temps of griddles, cooktops, etc.
- Swivel tip for better surface contact
- High accuracy to ±0.7°F (±0.4°C)
- Includes NIST-Traceable calibration certificate
- Water-resistant design (Body only)
- Includes Biomaster silver ion technology to reduce microbial growth
- °F to °C reconfigurable
- Auto on/off—no buttons!
- 1,500 hour battery life
- Includes padded zipper case
Measure the temperature of griddles, cooktops, hotplates, and other surfaces with higher accuracy than an infrared thermometer with our new Pro-Surface Thermapen. There are no emissivity adjustments to make or infrared distance measurements to calculate. Simply open the probe and measure.
Unlike separate probe and meter combinations, the Pro-Surface Thermapen is calibrated "as a system" for better accuracy. With the same swivel tip as our popular bell surface probe, you'll get solid contact with the measurement surface.
The Pro-Surface Thermapen reaches temperatures to 572°F and includes a NIST-Traceable calibration certificate. Each one is hand made and calibrated in England and made with a high performance type K thermocouple for top precision.
Designed for industrial use, the Thermapen body is splash-resistant. No buttons to press or learn. Swing open the probe and the Thermapen is on. No cables or plugs to wear out. The probe folds away for protection when not in use eliminating costly replacement probe purchases. For high temperature use order a protective silicone rubber boot for added thermal and drop protection.
Customize your Thermapen with micro configuration switches in the battery compartment. Switch from °F to °C, disable the auto-off, change resolution from 0.1 to 1, or perform a calibration trim.
For unmatched performance and convenience, order a Pro-Surface Thermapen for all of your locations and improve the performance of your heated equipment and surface measurements.
Specifications | |
---|---|
Range | -58.0 to 572.0°F (-49.9 to 299.9°C) |
Accuracy | ±0.7°F (±0.4°C) from -58 to 392°F (-49.9 to 199.9°C) ±1.8°F (±1.0°C) from 392 to 572°F (200 to 299.9°C) |
Resolution | 0.1°F/°C full range (user reconfigurable to 1.0°F/°C) |
Sensor | High performance type K thermocouple, with surface tip |
Operating Range | -4 to 122°F (-20 to 50°C), (max ambient limits of Thermapen body) |
Battery | CR2032 (3V) lithium coin cell x 2 |
Battery Life | 1,500 hours |
Auto-Off | 10 minutes (user reconfigurable to disable auto-off) |
Display | 0.55" (14mm) LCD (user-reconfigurable to °C or °F) |
Size | 6.1" x 1.85" x 0.75" (153mm x 47mm x 19mm) |
Weight | 0.22lb (100g) |
Calibration | Includes NIST-Traceable calibration certificate |
Surface Probe Tip
The Pro-Surface Thermapen uses the same tip as the popular bell surface probe. The tip of the probe pivots so the flat base of the sensor maintains solid contact with the surface being measured. The unit can tilt slightly at the base of the probe shaft so the display can easily be read.
What is Biomaster?
Biomaster is a silver-based antimicrobial additive that is molded directly into the plastic housing that becomes an integral part of the product to prevent bacteria growth on its surface. The controlled release of the active ingredient provides maximum antimicrobial protection for the life of the product. When bacteria come into contact with a Biomaster protected surface, the silver ions prevent them from growing, producing energy or replicating, therefore they die, inhibiting degradation, discoloration or odors. Biomaster is an additional line of defense between cleanings.* *Biomaster does not protect the user from disease causing organisms and is not a substitute for good hygiene and/or cleaning.