Fast Response Meat Probe Originally designed for measuring burgers, steaks and thin meat portions, this probe is often chosen for other purposes because it’s diameter is smaller than our handheld needle probe and it’s a bit quicker while leaving an even smaller hole. The 3.35" length allows you to reach the center of even a large burger when entering from the side, or it will reach the center of roasts for an extremely fast measurement. An optional detachable coiled or straight extension lead is also available. Max temp: 482°F (250°C).

To Order
113-151	Fast Response Meat Needle Probe

 

---

Miniature Needle Probe Use this probe for very small samples or just speedy response times. The PTFE cable and sealed junction allow the use of this probe in ovens or other cooking processes. Readings take only 2-3 seconds to a full value. Max temp: 482°F (250°C).

To Order
THS-113-181	Miniature Needle Probe, 39" cable

 

---

Plug-Mounted Penetration Probe Sharp penetration probe is mounted directly to an industry-standard miniature thermocouple plug. No cable included. Plug this probe directly into most thermocouple meters for a one-handed thermometer (meter/probe combination). Probe tip is swaged to a smaller diameter then sharpened for fast measurements and easy penetration. An optional detachable coiled or straight extension lead is also available. Max temp: 482°F (250°C).

To Order
113-161	Plug-Mounted Penetration Probe 5"
113-167	Plug-Mounted Penetration Probe 9"

 

Plug-Mounted Surface Probe Features a 0.32" diameter cylindrical head with a stainless steel ribbon. The thermocouple sensor is welded to the back of the ribbon. Max. temp. 482°F

To Order
113-045	Plug-Mounted Surface Probe - Straight

 

Plug-Mounted Mineral Insulated Probe Flexible, high temperature, stainless steel, rounded tip mineral insulated probe. Ideal for measuring high temperature liquids. Maximum tip temperature 2012°F.

To Order
113-213	Plug-Mounted High Temperature Mineral Insulated Probe

 

Plug-Mounted Air/Gas Probe The stainless steel shaft is open ended with ventilation holes provided in the sides to expose the bare thermocouple sensor to the outside for faster measurements of air or gases. Ideal for environmental readings, cold storage or HVAC work. Max. temp. 482°F.

To Order
113-301	Plug-Mounted Air/Gas Probe

 

High Temp Alligator Clip Oven Probe Stainless steel overbraid protects this probe along with a fiberglass inner sheath. An alligator clip allows you to place it right where you need it. 120" lead. Max temp: 950°F (510°C).

To Order
8468-22	High Temp Alligator Clip Oven Probe

 

---

High Temp Wire Probe Fibreglass insulation with exposed junction. Use for ovens and appliance temps. Max. Temp 662°F

To Order
113-382	39" length
113-383	78" length
113-385	10' length

 

Fast Response Penetration Probe We start with an 1/8" shaft and reduce the diameter to 1/16" at 1 inch from the needle tip. This gives you a compromise between durability and the better speed of a needle type probe. Used in liquids and soft semi-solids including rubber, plastics and similar materials. A complete reading takes only 4 or 5 seconds. Max temp: 482°F (250°C). To Order 303-159 Fast Response Penetration, coiled cable Smoke House Penetration Probe - Stainless Overbraid Penetration probe with stainless steel overbraid and 90 degree bend. 78" lead. Max temp: 482°F (250°C). To Order THS-113-177 Smoke House Penetration Probe - Stainless overbraid   Smoke House Penetration Probe - Stainless Armour Penetration probe with stainless steel Armour and 90 degree bend. 78" lead. Max temp: 662°F (350°C). To Order THS-113-178 Smoke House Penetration Probe - Stainless Armour   Right Angled Precision Surface Probe This is the fastest and most accurate handheld surface probe we’ve seen. Readings generally take less than 5 seconds! The sensor is made from flat-spring ribbons of thermocouple material. Very popular in equipment servicing applications and in the plastics and packaging industries. The shaft has a right angle bend to improve access where the surface is hard to reach. Max. temp. 932°F To Order 303-032 Right Angled Precision Surface Probe, coiled cable   Griddle Probe Heavy duty weighted surface probe for measuring temperatures of hot plates and grills. Stainless steel armor protects the cable from hot surfaces. Uses the flat ribbon spring sensor design for speed and accuracy. Though designed for the fast food business, this probe is used by many other industries where it would be convenient to set the probe on a surface and leave it for extended measurements. Max. temp. 482°F To Order 113-018 Griddle Probe