TempTest™ 1
5-up: $99.00 ea.
- 360° auto-rotating display
- Display rotates in 90° increments
- Intelligent backlight, turns on in low light
- Super-Fast® 3-second readings
- Waterproof rated to IP67
- Fixed reduced-tip penetration probe
- Includes holster with belt clip and wall mounts
- Includes NIST-Traceable calibration certificate
Handmade alongside the Super-Fast Thermapen, TempTest includes a patent-pending 360° auto-rotating display, which rotates in 90° increments (triggered by movement) enabling users to read temperatures at any angle. This new smart thermometer is loaded with features found only in ThermoWorks' innovative products. Advanced thermocouple technology, intelligent backlit display, Super-Fast reduced tip probe for 3-second temperature readings, and best-in-class accuracy.
TempTest 1 automatically rotates the display to the best viewing angle without pressing a button. The display rotates in 90° degree increments to read temperature in any position and in either hand. One-handed use frees up the other hand for stirring, mixing or recording. (US Patent Pending US 2014/0044147 UK Patent Pending GB 2504936)
TempTest 1 incorporates a button-less, Smart backlight that turns on automatically to read digits in low light conditions. A built-in sensor constantly monitors ambient light levels and switches the backlight on when needed. You'll always be able to read the display in any light condition.
With a fixed Super-Fast reduced-tip penetration probe, the same used on the Thermapen, you'll get readings in 3 seconds or less. Measure with an accuracy to ±0.7°F (±0.4°C) and cover a full range from -58 to 572°F (-50 to 300°C).
TempTest 1 is designed for commercial kitchen use with a waterproof IP67 rated housing and optional rubber boots for drop protection. The tight-fitting silicone boots are color coded for food safety and cross contamination protection. Kitchen splashes and inadvertent drops in the sink are no problem.
TempTest 1 includes a handy plastic holster for storage with a belt clip and wall mounting holes. Its ergonomic waterproof design with best-in-class features make TempTest 1 a chef's favorite.
| Specifications | |
|---|---|
| Range | -58 to 572°F (-50 to 300°C) |
| Accuracy | ±0.7°F (±0.4°C) from -58 to 392°F (-50 to 200°C) otherwise ±1.8°F (±1°C) |
| Resolution | 0.1° |
| Battery | 2 x 1.5 volt AAA; 5,000 hours typical (without backlight) |
| Probe | Type K Thermocouple, fixed, 0.13 dia. x 3.15 L inches (3.3 dia. x 80 L mm) |
| Auto Shutoff | After 10 min. |
| Water Resistance | IP67 rated |
| Display | 0.4 inches (11mm) LCD, rotates 360°, patent pending |
| Dimensions | 7.9 H x 1.9 W x 0.7 D inches (200 H x 47 W x 17 D mm) including probe |
| Weight | 3.7 oz. (105 g) |
| Certificate | Includes NIST-Traceable certificate |
Download TempTest 1 Operating InstructionsView Sample Calibration Certificate
360° Auto-Rotating Display
TempTest 1automatically rotates the display to the best viewing angle without pressing a button. Rotates in 90° increments to read temperature in any position and in either hand.
Intelligent Backlit DisplayButton-less intelligent backlight automatically turns on in low-light conditions. ItÕs on when you need it, and off when you donÕt.
Super-Fast Thermocouple TechnologyAs fast as the Thermapen, TempTest reads temperatures in 3 seconds or less with accuracy to ±0.7°F. Comes with a NIST-Traceable calibration certificate.
Slim Waterproof HousingTempTest fits comfortably in your hand and stores conveniently in the included holster for belt or wall mounting. Waterproof to IP67, the TempTest is sealed against kitchen splashes, unexpected dunks and wash downs.
TempTest 1 Holster IncludedEach TempTest 1 ships with a handy plastic holster with belt clip for convenience. Holster also includes holes for wall mounting. Slides in holster (without boot installed) for added protection and convenience