5-up: $44.00 ea.
- Simple to use and set up
- Automated PDF report—Plug Into any PC to download
- Includes NIST-Traceable calibration certificate
- Download to PC via standard USB-C cable—No expensive cradles!
- Push button check to see if High/Low alarms have been breached
- Set up logger through free software
- Replaceable battery with a 3-year life
- Perfect for food-safe transportation
ThermaData Lite temperature data loggers are a low-cost, simple-to-use logging solution perfect for food-safe transportation, storage, and more. The software is easy to install and set up for quick logging. ThermaData Lite stores up to 16,000 readings into memory, and automatically creates a pdf report of the logged readings for easy download at your end location.
Check the logger at any time with a simple push button indicator to see if the alarm parameters have been breached. This makes a perfect transportation logger. Check the alarm condition at the remote site without needing to download data.
ThermaData Lite includes a preprogrammed PDF that is automatically generated upon connection to a computer. The automatic PDF report includes when the first reading occurred and when the last reading occurred, the reading interval, the preset high and low alarms, the total number of readings, the maximum and minimum temperatures recorded, the 5 longest alarm breaches, as well as a instructions section. All of these features give the user actionable data enabling them to make on-the-spot decisions such as accepting or rejecting a delivery.
With a temperature range from -40 to 185°F, you can record temperature data in the walk-in, in transit, in cold storage, and on the factory floor. Convenient setup screens in the software allow you to configure the recording interval from 6 seconds to 4 hours and 15 minutes (255 minutes) per reading and start on a delay. Data can be emailed, exported, and reviewed with our software or even EXCEL.
ThermaData Lite loggers are available in white, black, blue or yellow. An eyelet tab makes it convenient to hang securely. Select an optional waterproof pouch for rugged data logging environments.
The same easy-to-use ThermaData Studio software runs Wi-Fi, Series II, stainless steel, and thermocouple loggers so you'll only need to learn one software package to run all of your temperature and humidity recorders.
|Range||-40 to 185°F (-40 to 85°C)|
|Memory||16,000 readings, stop when full|
|Sample Rate||Settable from 6 seconds to 4 hours 15 minutes (255 min)|
|Software||ThermaData Studio (free download)|
|System Requirements||PC running Windows 7 or higher|
|Operating Range||-40 to 185°F (-40 to 85°C)|
|Battery||3.6V 1/2 AA - Li-SOCI / 3-year life typical|
|Dimensions||2.16 dia. X 1 D inches (55 dia. x 25 D mm), plus eyelet tab|
|Certificate||Includes NIST-Traceable calibration certificate|
Visit our Help Center For more information and troubleshooting tips.
Click here to download the free software.
ThermaData Studio Software
• Set up data loggers, create alarm parameters and program recording intervals.
• View, print time/temperature graphs
• Displays in table format or in graphical representation
• Export to Excel
• Display Alarm marks
• Probe Map for live monitoring
• Create your own dashboard view
• A single software suite for dozens of data loggers
Connect up to 32 qualified temperature recording devices to a single software portal, the ThermaData Studio Software Suite. With just one software package to learn, you’ll quickly be able to setup, download, and monitor temperature readings from anywhere you need it.
For ultimate data convenience, you setup your own dashboard view. Add a trend graph in real-time, table view of recorded readings, statistical analysis in real-time, current reading display, summary data view and more. View the data that you want to see the way you want to see it.
View the data you want to see, when you want to see it. Customize your ThermaData Studio dashboard view with real-time trend graphs, table views of recorded readings, statistical analysis, current temperature displays, summary data view and more. Import a map of your facility and with ThermaData WiFi Loggers you can add each device in the map view. See exactly where every alarm condition is located.