+
+
Step 3 - Add an accessory
Billows® BBQ Temperature Control Fan Kit (with Damper)
Billows is an automatic BBQ control fan that keeps your smoker at a steady target temperature — without constant vent adjustments or fire tending. Paired with a compatible ThermoWorks controller (RFX GATEWAY™, Signals™, Smoke X™, and ThermaQ® 2), Billows regulates airflow into your smoker, increasing or reducing oxygen as needed to maintain consistent heat throughout long cooks.
Once connected, Billows takes over the hard part of low-and-slow cooking. It brings your smoker up to temperature quickly, stabilizes heat with minimal overshoot, and helps recover faster after opening the lid. That control translates to fewer flare-ups and more consistent results over long cooks, whether you’re smoking brisket overnight or running a long weekend rib cook.
Includes Billows Damper which lowers Billows air flow by restricting CFM, has 16 adjustment stops to fine-tune your cook to give greater control over Billows functionality
RFX MEAT™ 10-Probe Charging Block
Power 10 RFX MEAT Probes at one time and in one place. The RFX System is built to grow, and we've built a charger that can handle that growth. The charging block is powered by an AC adapter—no need to worry about changing batteries.
Quickly charge your RFX MEAT probes in 10 minutes for up to 52 hours of cooking. Or fully charge your probes in 20 minutes for 65+ hours of cooking.
DOES NOT INCLUDE: RFX MEAT Probes
Includes: 10-PROBE CHARGING BLOCK, USB charging cable and adapter
Compatible with: RFX MEAT and RFX MEAT Mini (10x probes)
7.25 x 5.625 x 1 Inches (184 x 143 x 26 mm)
Pro-Series® High Temp Straight Penetration Probe (included with DOT and Square DOT)
The Pro-Series High Temp Straight Penetration Probe is a general purpose utility probe that is useful throughout the kitchen. Insert the reduced-tip penetration probe into roast, or loins to continuously monitor them as they cook. Good choice for threading through access holes in grill hoods.
Designed for use in the commercial kitchens and professional settings, the Pro-Series Probes deliver better accuracy, faster readings, unique designs, wider temperature ranges and better moisture resistance than the probes sold with low-cost “houseware-grade” temperature alarms.
Works only with ThermoWorks Signals™, Smoke™, Smoke X™, NODE™, ChefAlarm®, Square DOT®, BlueDOT®, DOT®, and RFX GATEWAY™
Pro-Series® High Temp 2.5-inch Straight Penetration Probe
The Pro-Series High Temp 2.5-inch Straight Penetration Probe is a general purpose utility probe that is useful throughout the kitchen. Insert the reduced-tip penetration probe into chicken breasts, or loins to continuously monitor them as they cook. Good choice for threading through access holes in grill hoods.
Works only with ThermoWorks Signals™, Smoke™, Smoke X™, NODE™, ChefAlarm®, Square DOT®, BlueDOT®, DOT®, and RFX GATEWAY™
Pro-Series® High Temp Needle Probe, 2.5"
Unlike other "one-size-fits-all probes" that leave a huge hole in your food, this needle probe gives you high-precision temps while leaving an almost undetectable hole. This slimmer body and water-resistant transitions are designed to meet the high-temperature and humidity demands of competition steak and BBQ teams, but is also perfect for fish, shrimp, lobster, sausage, ribs, and all thin cuts.
Part of a family of probes compatible with most ThermoWorks alarm thermometers including Signals, Smoke X, DOT, and ChefAlarm that are unequaled in the professional market for performance and versatility. Expand the capabilities of your current ThermoWorks alarm thermometer by trying a new probe today.
ThermoWorks is a professional instrument company that understands sensor technology, probe construction, and the importance of accuracy in thermometry
Designed for use in commercial kitchens and professional settings, the Pro-Series Probes deliver better accuracy, faster readings, unique designs, wider temperature ranges and better moisture-resistance than probes sold with low-cost houseware-grade temperature alarms.
Works only with ThermoWorks Signals™, Smoke™, Smoke X™, NODE™, ChefAlarm®, Square DOT®, BlueDOT®, DOT®, and RFX Gateway™
Pro-Series® Waterproof Needle Probe
This unique probe is an excellent choice for Sous Vide cooking. The immersible mini-handle/transition seals the probe assembly against moisture so the probe still works in a water bath or a simmering pot. Suitable for thick and very thin portions of meat. Reads extremely fast for spot checking foods on a grill or saute pan. The silicone insulated cable can survive oven temperatures up to 500°F short term and is super-flexible for convenience.
Designed for use in commercial kitchens and professional settings, the Pro-Series Probes deliver better accuracy. faster readings, unique designs, wider temperature ranges and better moisture-resistance than the probes sold with low-cost "houseware-grade" temperature alarms.
Works only with ThermoWorks Signals™, Smoke™, Smoke X™, NODE™, ChefAlarm®, Square DOT®, BlueDOT®, DOT®, and RFX GATEWAY™
Pro-Series® High Temp 12-inch Probe
The Pro-Series High Temp 12-inch straight penetration probe is great for monitoring internal temperatures of large cuts of meat, deep insertion into soup pots, turkey frying or brew kettles.
Designed for use in the commercial kitchens and professional settings, the Pro-Series Probes deliver better accuracy, faster readings, unique designs, wider temperature ranges and better moisture resistance than the probes sold with low-cost “houseware-grade” temperature alarms.
Works only with ThermoWorks Signals™, Smoke™, Smoke X™, NODE™, ChefAlarm®, Square DOT®, BlueDOT®, DOT®, and RFX GATEWAY™
Pro-Series® High Temp Cooking Probe (included with Signals, Smoke, and ChefAlarm)
The Pro-Series High Temp Cooking Probe has a 6" long probe with a right angle bend for easy pulling from meats or turkeys. Probe tip and sensor read temperatures to 572°F for deep-frying. Good general-purpose probe that reaches the center of large roasts and turkeys.
Designed for use in the commercial kitchens and professional settings, the Pro-Series Probes deliver better accuracy, faster readings, unique designs, wider temperature ranges and better moisture resistance than the probes sold with low-cost “houseware-grade” temperature alarms.
Works only with ThermoWorks Signals™, Smoke™, Smoke X™, NODE™, ChefAlarm®, Square DOT®, BlueDOT®, DOT®, and RFX GATEWAY™
High Temp Probe Rings
Included with Smoke X and Signals thermometers, but also sold separately for other devices. These colorful probe rings are rated to 600°F (315°C). Put one on each end of a probe to quickly identify which input matches with which probe. Includes 2 each of blue, black, green, orange, pink, purple, red, white, and yellow probe rings, one for each end of up to four probes. Compatible with all ThermoWorks probes.
Pro-Series® High Temp Air Probe With Grate Clip (included with Smoke and Square DOT)
The Pro-Series High Temp Air Probe measures air temperatures in ovens and smokers. Comes with a grate clip to attach the probe close to your food. The gauges that come in ovens or smokers never read the correct temperature.
Works only with ThermoWorks Signals™, Smoke™, Smoke X™, NODE™, ChefAlarm®, Square DOT®, BlueDOT®, DOT®, and RFX GATEWAY™
Extra Large Zippered Storage Case
Large enough for your entire BBQ Kit
4.2x the storage capacity of our large case. With two mesh pockets available to store your Signals and Billows cables, you won’t misplace your cords with this case..
Secure storing with MOLLE
MOLLE stands for “modular light-weight load-carrying equipment” and is specially designed to offer maximum customization. Using the provided straps, give each tool a designated place to protect them from damage.
Includes: 4 Large Straps and 4 Small Straps
5-loop Integrated MOLLE system on the interior base and lid
• 5 rows on the bottom
• 4 rows on the lid above the mesh pockets
Deep enough to stack all your probes
Wish you could stack your probe spools four-high? Check. The XL Storage Case is designed for the cooking enthusiast who keeps a probe for every type of cook. Store all your probes in neat stacks or spread them out. It’s up to you.
Experience a BBQ case large enough to keep all your gear in one spot and strong enough to keep your expensive tools safe.
Say hello to the ThermoWorks XL Storage Case. Expanding on our popular Large Zippered Storage Case, the new XL Storage Case gives you 2x the space for added flexibility to build your own BBQ kit exactly how you like it.
RFX Starter Kits
New to the RFX platform? Grab a starter kit to jump start your collection. It includes everything you need to get started: RFX GATEWAY and 1, 2, 4, or 6 full-size RFX MEAT probes. Want the new MEAT Mini for smaller cuts? Add it below.
$212.00 $265.00
*RFX MEAT™ Mini not included in Starter Kits.
How RFX™ Works
Get to know RFX piece by piece. Scroll on to see how the signal reaches up to 1,500 feet through steel and walls, how four sensors find the coldest spot in every cut, why the probe takes 1,000°F, and how one charge outlasts the longest cook. It all comes together in one app.
Probe. Gateway. Phone.
RFX MEAT & MEAT Mini send their readings to the RFX™ GATEWAY over a patent-pending sub-GHz radio signal built to push through steel lids and walls. The gateway passes them to the ThermoWorks app over Wi-Fi, so you can check your cook from anywhere. No Wi-Fi? It connects straight to your phone over Bluetooth.
1,500 FT RANGE
Line of sight from probe to gateway.
WI-FI / BLUETOOTH
Live temps on your phone, near or far.
50+ PROBES, 1 GATEWAY
Run the whole pit, or the whole kitchen.
1,500 ft. line of site.
560 ft. through walls.
Out in the open, RFX MEAT and MEAT Mini reach the gateway from up to 1,500 feet away. With walls, ovens and smoker steel in the way, it still holds up to 560 feet. That's enough to keep the gateway inside, out of the weather, while the probe rides in the pit out back. Need more ground covered? Add another gateway.
Big cuts. Small cuts. One app.
A brisket and a chicken breast don’t need the same probe. RFX MEAT is built for the long haul: deep enough for pork butt and whole turkey, with 65+ hours of battery to outlast any smoke. RFX MEAT Mini is sized for everyday cuts. It needs just 2.36" of meat to read, so it seats fully in chops, filets, burgers and fish. Both carry the same four sensors, and the app shows the lowest reading, so you’re always watching the part of the cut furthest from done. In the App you can switch to advanced mode to see the reading of all four sensors.
Takes the heat. All 1,000°F of it.
Open flame, a spinning rotisserie, a ripping-hot grill: RFX probes are rated to 1,000°F, so you can cook as hot as you want without babying the probe. Insert past the line (3.15" on RFX MEAT, 2.36" on the Mini), and the four sensors stay in the meat while the rest takes the fire.
Ten minutes on the charger. Two days in the smoker.
A 10-minute quick charge takes RFX MEAT to 80% and up to 52 hours (up to 38 hrs for MEAT Mini) of cooking, which covers the longest brisket you'll ever put on. Give it the full 20 minutes and you get 65+ hours (up to 48 hrs for MEAT Mini). The charging block runs on a single AAA battery good for 175+ full charges, so you can top up at the pit with no outlet in sight.
"Perfect food, every time."
The same app the pros cook with.
Backyard cooks and commercial kitchens run on the same ThermoWorks app. There's no consumer version and no pro version, just one app with every feature, built to stay up through the longest cook.
4.8
17K+ app store reveiws
35B+
Temperature readings logged
99.99%
App uptime
HIGH & LOW ALERTS
Get notified on your phone, tablet or smartwatch the moment a temp crosses your mark, without lifting the lid.
THE WHOLE COOK, GRAPHED
Every session is recorded and graphed, so you can see the cook from start to pull and look back at past ones.
SIGNAL STRENGTH
See the connection strength of each RFX MEAT probe, so you can place it for a strong signal before the cook starts.
ALL YOUR GEAR, ONE APP
RFX, Signals, Smoke X4, NODE, BlueDOT and more, all tracked in one place.